15'' Car Subwoofer Dvc 4-Ohm

What is the best amp to pair with this subwoofer

PLAM1600

In your description it says can be wired at 4 or 8 ohms. Shouldn't it sy 2 or 8 ohms

All arecoprrect. It is 2 ohms if the connection is in parallel, 4 ohms if it is a single-coil connection, and 8 ohms for series connection

Cuál es la potencia Rms real de este bajo?

son 1000w rms

What size box would I need for 2 of the plp15wd?

https://www.amazon.com/E15D-Sealed-Carpeted-Subwoofer-Enclosure/dp/B0013MYXFC/ref=sr_1_4?crid=22ANF35AQESG4&keywords=speaker+box+15%22&qid=1651535624&sprefix=speaker+box+15+%2Caps%2C322&sr=8-4

What kind of break in do you recommend for the 15" Pyle power subwoofer(PLPW15D)?

The speakers are all ready for use as they are already tested

What size amp should I use wit 4 PLPW15D subwoofer

PLA2200

i have two of your wonderfull subs and two boss mono block single port 2000 w amp what would be my best wiring setup

You can connect the speaker terminals to parallel and set level control to 50% set bass boost to Max and LP to 80Hz 10 O'clock on the knob

How box of abox is needed for a single 15 inch subwoofer...or a cut sheet to build a sealed and ported box

Sub Cut Out: 14”, Mounting Depth: 14.25”, Height: 16.25”, Width: 18”, Depth: 14.75”

Anyone know if the plastic ring around the speaker comes off or is it permanently attached? The plastic basket??????????

It is permanently attached

What is the best way to wire the speaker's for the best sound and Bass?

Parallel

What is the Theile Small Parameters on the Plpw15d?

https://pyleaudio.com/Manuals/PLPW15D_Spec_Sheet.pdf

Does this speaker need holes in the box. Or does it have to be sealed?

It need holes in the box