Kit d'enceintes PA Bluetooth 700W - Double enceintes 8", pieds, micro, télécommande

Is the 1/4’’ SpeakOn (8 Ohm) Input a TRS input? That is, is it stereo or just mono? I have a direct box with two 1/4" line outputs and I want to know if an adapter for the Pyle line input should have an output that is TS (mono) or TRS (stereo).

Speaker OUT is TS. It is also a High-level output

Can wireless mics be used with this system? If so which ones and what's the max limit?

Yes, you can try our PDWM3375

CAN I ORDER THE MICROPHONE AND CORDS SEPARATE. I PURCHASED THE SYSTEM BUT HAVE MISPLACED THE CORDS AND MICROPHONE AND REMOTE.

POWER CORD:

https://www.amazon.com/Goalfish-Replacement-Certified-Computer-Projector/dp/B09288ZKBD/ref=sr_1_1_sspa?keywords=3%2Bprong%2Bpower%2Bcord&qid=1639007002&sr=8-1-spons&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFOU1VOWjRHU1dCTjEmZW5jcnlwdGVkSWQ9QTAwMTMwMTgzRkI3UFVBTUJHOUM0JmVuY3J5cHRlZEFkSWQ9QTAzODczODAxSUpGRzczOEg3UEdRJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ&th=1

Speaker Cable: 

https://www.amazon.com/GLS-Audio-Speaker-Cable-16AWG/dp/B004Z2NS4E/ref=sxin_15_ac_d_mf_br?ac_md=6-4-R0xTIEF1ZGlv-ac_d_mf_br_br&crid=2Z32D1LWLHQO2&cv_ct_cx=1%2F4%2Bto%2B1%2F4%2Bspeaker%2Bcable&keywords=1%2F4%2Bto%2B1%2F4%2Bspeaker%2Bcable&pd_rd_i=B004Z2NS4E&pd_rd_r=2ab33003-7269-421d-b031-59f2bc9e4d90&pd_rd_w=C74V8&pd_rd_wg=bv2BY&pf_rd_p=17756b3a-4504-468b-830d-8b5875afd168&pf_rd_r=MZCRBK8MBD0VJQKHCV9A&qid=1639007144&sprefix=1%2F4%2Bto%2B1%2F4%2Caps%2C407&sr=1-3-ed8a42d3-65f1-4884-a3a2-0dd6e83b6876&th=1

Microphone:

https://www.amazon.com/Dynamic-Karaoke-Microphone-Singing-Handheld/dp/B09DYJK7G9/ref=sr_1_53?crid=27HGOQ280EHHN&keywords=dynamic+microphone&qid=1639007535&sprefix=dynamic+%2Caps%2C408&sr=8-53

How can I pair the Speakers with my phone ? It is t showing under my Bluetooth .

Press the mode button and set it to Bluetooth. Then pair your phone

How to manually disconnect Bluetooth on speaker

Just simply turn off the Bluetooth on your mobile device or forget Bluetooth

How can I connect my projector to the speakera I'm using my auxiliary cord but it's still not working.

It should be connected through the Audio OUT of the Projector to the LINE IN of the PPHP849KT

Why won't my 8" PA Loudspeaker Sound System Package PPHP849KT power up.

Please try to check if the power cord is plugged in nice and tight to the back of the speaker.

check other power outlets to see it will work on other sockets

Make sure also that the switch is on

can I use a mixer board with this system

Yes you may use a mixer with this

Can you add an external woofer to these speakers for more base

NO

Can I put one speaker in one room and the other in another room and hear it in both?

As long as the supplied cable is long enough to go to the other room or you can use a longer speaker cable

Which speaker is left and right side.

Right side is the one with the Power and controls

INEED A REPLACEMENT REMOTE WAS NOT IN THE BOX

The remote control is currently not available

Accidentally fried the amp in the back of the speaker is there a way to order a replacement?

There is no replacement Amp module

Just got the pphp1249kt but when trying to pair bluetooth, nothing ever shows up to connect to. I have tried it on several phones. Am I missing something or is there a problem with the unit?

Make sure that the speaker is on Bluetooth Mode or BT before pairing the device

Can you post a link for replacement stands?

https://pyleusa.com/products/pstk107

https://pyleusa.com/products/pstnd2

Does the cord to connect the active speaker to the passive speaker come with the Package?

https://www.amazon.com/PLoynk-Professional-Audio-Speaker-Cable/dp/B01D20L5AI/ref=sr_1_11?crid=FBM6O801YZZD&dib=eyJ2IjoiMSJ9.GroQYPMpyVX9a5RC1IO2yEeaCQtJZzG3T4EweV7eUYRQt007A_u3c9-qylZgM4sAcLeuFQ1rsl_g3-klUYX1qnyN34kAxZOC-RR97DKPashD4u5mtgbeiHaIZKXKMdQjV2NKMoG6dTrO-TSe6cTsOAl0BnFq_oWH9_n61jnEuEMV1HyO7yyLIh494RJbx8dyyPC_kmfM4yI-8yVv7MC-zkBE_GaHG7bV3RUmMAaRPpX4PgUgKAZzqjZkkpPSXJvCI-XT1FCu9QBk_b35psfSiIYOr5RRqePXrakHCnD00Qc.tA09YWWs-PqmmtxoJBGIsaV87WXjA7BPp8h-MdNk1SA&dib_tag=se&keywords=1%2F4%22%2Bto%2B1%2F4%22%2Bspeaker%2Bcable%2B30ft&qid=1715816462&s=industrial&sprefix=1%2F4%2Bto%2B1%2F4%2Bspeaker%2Bcable%2B30ft%2Cindustrial%2C329&sr=1-11&th=1

Is it possible to connect my Pyle Wireless Bluetooth Streaming UHF Mic System (Model PDWM2234) to my Pyle Active & Passive PA Speaker System (Model PPHP849KT) so that I have 3 microphones connected to the PA Speaker System rather than just the single wired mike connection that comes with the Speaker System? If so, please describe the steps to do that. Thanks.

Yes it is possible. Simply plug the receiver to the mic input jack

I can't get the remote control to work. I put in a new 2025 button battery (plus side up), aimed it directly at the ir receiver just 6 inches away, but it still does not function. Thank you for suggestions/guidance.

The remote control works in a limited function only such as changing modes from FM radio to Bluetooth, to mp3 USB. Ity can also Play the mp3 files, reverse and skip function and repeat functions. If it does not do any of these [please contact customer support hotline

I have two questions. 1. Do you make a subwoofer that is compatible with these speakers? 2. Can I use another non-powered speaker with this pair?

The PPHP849KT does not come with a subwoofer, but you can connect one to the speaker output port on the back panel of the active speaker.
You can use any subwoofer that has a 1/4'' SpeakOn input and an impedance of 8 ohms or higher.

You can also use another non-powered speaker with the PPHP849KT, as long as it has a 1/4'' SpeakOn input and an impedance of 8 ohms.. You can connect it to the speaker output port on the back panel of the passive speaker.

The height adjustment should be from 59.1 inches to 82.7 inches. How do you get them taller than the 59.1 inches.

Adjust the tripod speaker stand of the unit.

When changing modes can I change the voice that is programed. Line in is spoken in Chinese the rest of the modes is English.

Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.

If I buy two sets (4 speakers) can I pair one Bluetooth source to all speakers?

No, the unit will only work one device at a time.

Can these 2 speakers act as extension speakers to another receiver, in particular a vintage 200 amp Sansui? I’d like to run these 2 Pyle speakers from my speaker outputs on the vintage Sansui amp? Will it work? Thx

No,  the unit is already amplified at did not require any amplifier to work.