Alimentation de banc compacte 30A convertisseur AC-DC régulé avec ventilateur de refroidissement

What is the ripple of the dc output in milli or micro volts?

We currently do not have this information at hand but you can contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST

My power suply only have an output of 6 v could you help me?

Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.

Re: The 30 Amp Hobbyist Bench Power Supply PSV300. Would it be durable enough to handle repeated use of a 12v truck-tire inflator rated peak 20A (nominal 17A) with a direct drive permanent magnet motor.?

PSV300 is durable enough to handle truck-tire inflator

Would it be advisable to run a 50VDC capacitor across the output terminals to cut down the amount of noise on the output of this power supply? Would it damage the power supply in any way?

That will be fine. It will not damage the power supply

Where can I get banana plugs that fit the PSV 150 and PSV 300 supplies?

You can check this link

https://www.amazon.com/FosPower-Speaker-Connectors-Receiver-Amplifiers/dp/B06Y6CQCX1/ref=sr_1_11?crid=1M0TTQNKFHB6B&keywords=Banana+Plugs&qid=1641318077&sprefix=banana+plugs%2Caps%2C328&sr=8-11

Where can I obtain service parts manual or schematic for the 30 Amp Hobbyist Bench Power Supply PSV300.

There is no available schematic diagram for PSV300

How can I get the schematic diagrams for the PSV-300? I have two on my bench that need repairs.

Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.

Raymond had replied, but I was away from my computer. I only have it connected to the meter, with no load on it.

Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.

I had a lightning strike near the Home knocked off our modem and dis power supply. And wondering where the fuse is on this? I have two of these and only one got affected.

The fuse is located inside the unit