Système de récepteur stéréo home cinéma

How do I get the remote control

The remote control for the PT260A is currently not available

The radio will not tune beyond 99.9. The instructions does not say if it should.

Please check if the antenna is wired properly. It should go up beyond that frequency

can i connect a subwoofer to this receiver

There is no subwoofer out on the unit

can this connect to my phonograph?

No it will require a phono preamp

I bought a Pyle PTA 260 and I can't figure out how to hook it up to the television. Please help.

You will need a digital to analog converter to connect to the receiver

can i buy just buy the remote for pt260a ?

the remote control for the PT260A is currently not available

what is the input impedance for FM antenna?

75 Ohms

My PT260A always powers up at full volume, even though it was set at level #6 or #8 when turned off. Also, the EQ/Level Meter appears to be flashing randomly, rather than really displaying any actual information. Are these normal operations for this model?

Powers up at a loud volume are something that is not normal. There may be a problem with the unit and the EQ/Level Meter only flashes randomly it does not display an actual reading.

I have no sound

Check the wiring and input source as well as the mode selection if it is on the right mode setting.

on the PT1100 1000watt power amp, is it possible to connect a subwoofer, even though there seems to be no specific outlet for, it on the back . A couple of people on the internet said they did, but did not specify how. Thanks, Brian at btim@shaw.ca

You can connect through the REC LINE OUT

How many watts at 4 ohm two channels

100W x 2 @ 4 Ohm

How do you get the memory to hold. I can't get it to work.

Try searching for station and press memory and then the number location you want on the remote

Which input do I use to connect my phone into? Aux or mp3. Neither are working

Any of the 3 inputs at the back of the unit. iPod / MP3, AUX or CD / DVD using an RCA to 3.5 Cable.

1. My antenna arrived with the base in two /pieces without a third piece in the bag. 2 How do I wire the antenna. Do I have to strip the wire ends 3 Do you have instructions for wire type and prep , I am sorry for the questions but I amp trying to replace my late husband's Sony model str de 335 which has too many ports for me and is ancient.

There are 2 antennas, one is the loop antenna for the AM radio and the other is  for the FM

Can I use a turntable with this model?

the unit does not have a phono preamp 

Where is this receiver manufactured?

China is still the leading exporter of parts and electronics to the United States. China accounts for over 80% of electronic parts exports. They are, nevertheless, closely regulated for US quality requirements.

Is it safe to use a 200watt sub woorfer 4ohm with my Pyle PT260A 200watt 4-16ohm receiver .

The PT260A does not have a Subwoofer output and it can only drive a full range speaker

Can I get this system to work without a Remote ?

Yes you can

How do you raise or lower the light levels on the DB panel and volume level meter... Mine is so low I can't see them.... Thanks

The system does nmot have controls for the back light

How do I switch between speakers output A&B?

There is no option to select from Speaker A to B