Amplificateur audio professionnel Bluetooth à 2 canaux

does this product have FM radio ??

No this is just an amplifier

Can a pyle PDMIC58 mic be directly plugged into this amp for use as a PA system, Or does a passive mic need a gain amp first?

Yes PDMIC58 can be connected directly to the amp

For the PTA 1000 what is the bridged output in watts and is it 2 ohm stable?

500 watts RMS on Bridge

Is this amplifier capable of handling a sub woofer?

Yes it is capable

When I turn on amplifier are the fans supposed to turn on automatically

Yes the Fan runs automatically

How much power does the PTSD1000 draw? I know 1000 watts it puts out thanks

We tried to to check but there was no documentation of the power drawn

Are the outputs in the back able to receive audio from a mixing board or is it just bluetooth

Yes it is capable of handling Mixing console

i am from uae looking for Pyle Pro Amplifier PTA 1000 - 26qty , want to know status of stock and shipping to UAE for the same

We have more than enough stocks for your requirement.

can you bridge this amp to another amp

No, the PTA1000 can’t be bridged to another amp.

I have one of these and would like to use it to power 4 small wall mount speakers. What would you recommend for speakers?

https://pyleusa.com/products/pdwr50w?srsltid=AfmBOooXknqrkc1E1TKTBuyAH-FeDj89dddCEtGA_XtiWYAKmq1KHyPJ

Hi there, I’ve been looking through your products and need help. I’m looking for your most powerful 2 channel or 4 channel home audio Bluetooth amplifier/ FM receiver or just an amplifier and possibly an equalizer to go with it. I need to power a set of Cerwin Vega D-9 speakers that will handle 350 RMS at 8 ohms each, what do you recommend! I’ve been looking at your PTA1000BT and your PT1000, neither are FM receivers I believe, are there any other ones that I missed? Do you have an equalizer and possibly a separate FM tuner that will work these amps as well? It’s for home use, small parties. Please let me know thanks. Cary Jonasson

PPRE70BT for FM and preamp
We don't have equalizer so We recommend Rockville:
REQ42-B ROCKVILLE equalizer

Is Bluetooth 5.0 or 3.0?

Bluetooth Version: 5.0

I have this hooked up with channel A powering the left side of the stage and channel B powering the right side of the stage. my inputs from the mixer are L channel A and R channel B When I turn the bluetooth on that is swapped and it sends the right hand signal to channel A and the Left hand signal to Chanel B.. Is there any way to change that or do I have to swap the rest of my setup to match the bluetooth?

You have to swap the rest of the setup to match the Bluetooth because the Bluetooth is internal

Can this be used with a mixer? I have a problem when bluetooth is enabled the mixer , mics are not usable

Yes, the PTA1000 can be used with a mixer.

What is the width of the main body of the amp without the rack mount brackets?

Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.

In Bridged mode - which speakon connector terminals should be used: +/- 2 or +/-1? Or does it matter?

Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.

If the unit is in bridge mode, which input do I use (left or right)? Do I need to adjust both volume knobs, or just the one associated with the input?

You can use either the inputs left or right and adjust the volume to which input will be using.

Is this a 70v amp or an 8ohm amplifier ? One is installed in a system I’m working on later this week. Not there yet but it’s hooked up to 10 ceiling speakers. So I’m hoping it is a 70V amp.

The unit is not a 70v amplifier. It is an 8ohm amplifier in 250watts

How do I connect stereo speakers and a subwoofer to this amplifier? I don't see a subwoofer out.

The unit is capable of connecting a subwoofer, just the sub needs to be bridged.

I have purchased three of your apps and all three of them had only one fan not two as you guys show pictures of having two fans why I don't know you would put that in there like that also the last one I got I'm sending back tomorrow it was smashed up shipping box had a big hole in the bottom of it I don't know what's up with this 2000 watts and 1000 Watt both amps look identical don't know if it's really that or not you say one thing about the fans why don't it be the same way with your wattage?

We have 2 types of PTA1000's the other one has the Bluetooth antenna in front plus some added features USB/SD slot with mp3 controller. This one uses a single fan cooler