Amplificateur de puissance Bluetooth 2000W, pontable, écran LCD, montable en rack

How high is it in a rack mount? I need a 1 U space high amplifier? How much is the 2000 watt amplifier? i have two or four speakers. 2 for a small event or 4 for a larger Event. The are JBL's with each box 12"- 15" Speakers I think I need the 2000 watt unit. I need a 1 U high spacing for it as well. i bought a PSA 2000 that i was using but has failed, so to replace that the cost?

PTA1000BT 2000 watt amplifier
For U racks please check out Amazon

if I am listening to an FM station and turn the power off, when I turn the power back on, it defaults to the blue tooth setting. Is there a way to have it remain on the FM station upon power up?

There is no option to change the default input state

What is the true rms power output to the speakers?

2 x 500 Watt @ 8 Ohm

How do you bridge a Klipsch speaker horn to this amp, Using the standard red and black connectors. Do I need to change the model dip switch from stereo to bridge? Will the speaker play back all aspects of the sound recordings are will I miss some of the recorded music sound?

Yes, to run the PTA1000 in bridge mode, you’ll need to set the model’s DIP switch to “Bridge” and connect the speaker to the correct red/black binding posts as shown in the manual.

Keep in mind that a single Klipsch horn is only one part of a speaker system—it plays mid/high frequencies, so you won’t hear the full range of the music unless it’s used with the matching woofers and crossover.

What is the rms power? Not the fake max power i can see that. some of these amps might say 1000w max but only deliver 100w rms. This is probably a sign to go with another brand...

• 2 x 500 Watt @ 8 Ohm

I am interested in obtaining the frequency response details for your PyleUsa 2-Channel Bluetooth Power Amplifier - 2000W, specifically up to 100 kHz. Could you please provide this information or share a detailed specification sheet? I would like to use it in a research experiment to amplify a 100 kHz signal. I understand that the amplifier is supposed to function in the audio frequency range, but I would like to know its output at 100 kHz. It doesn’t need to be at the 3 dB level, as 100 kHz is beyond its usual operating range. Best regards, Abdullah Zubair Mohammed, Research Assistant, Virginia Tech

What show in the listing is what the frequency response is. We don't have other information than that.

This amplifier is very low on my microphones. I use itc receiver and microphones but the sound is too low and you have to put the mic on the mouth to be heard. When I use any other Amplifier, the sound is loud enough. Could there be something I need to do?

This unit does not have a mmicrophone preamp

does this come with rack ears for rack mounting

Yes

What cable do I need to relocate my Blue tooth antenna

https://www.amazon.com/BLTIATLE-Extension-Connectors-Adapternot-Equivalent/dp/B0CJ85CGMX/ref=sr_1_1?crid=1ZZ2REIV7MLQ0&dib=eyJ2IjoiMSJ9.DTA4TbtJEokCjtuvZnUcGnY8X6TOW16yc4xuBraGMY8ZVneQc9goF38xhZMF1QtbrL7RfWUg8QiN-sWWCDcMvtTYTtahZVvC7B0kz30v75yBbZ8_pH6a7-ZIGORNLlxAmKz5ACOeSZsFk7k9fWQtZ2Fq6WFO7XJjGh-bJn8h0K1HMS8Gp8akEm6xOV4xyIscOZAQs1n3A2v1syHAc3HSw9kMhIiPGFjz9qSQNEdmLsUKoQ7ApHEqU_nzBPK7xKl6RFDHdQdnFgme-5vJZv6A18VlTvANQeHVdJydQ12rYVA.M02F7a-RqjxFcKLtUCVNGOIL8QPPLn_dol5zXcB_GN0&dib_tag=se&keywords=Bluetooth%2Bextension%2Bcable&qid=1722641979&s=electronics&sprefix=bluetooth%2Bextension%2Bcable%2Celectronics%2C322&sr=1-1&th=1

Do you have a warranty?

Yes we have a one year manfacturing warranty for parts and services

Hello, What cord do I need to connect to my Samsung TV for surround sound.

This unit is not for suround sound. You want to look at PT796BT.

https://www.amazon.com/Pyle-7-1-Channel-Bluetooth-Stereo-Amplifier/dp/B08LX2LHXV

How do I change the mode to an external source? I have it plugged into a digital carillon bells box via xlr cable but I can't figure out how to change the mode so it "sees" the carillon bell box. It will only change between bluetooth and radio modes.

Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.

Can I not have Bluetooth or Aux playing at the same time as the rear inputs? Example, microphones in the back and iPhone hooked up in the front playing together.

Modes are working one at a time.

how to get thiws to connect with my pc fro play off either usb or the audio jack in the rear. It is stuck on bluetooth connection and wont change to anyother input but radio

There is no option for you to connect the unit to the PC.

Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.

How much does your PTA1000 watch does it do in bridge mode how many watts in bridged mode .-- how many inputs do you need to put in this inputs for mono in which A or B volume knob controls the input voltage air B ?

PTA1000BT is 2000 watts on bridge.
Use volume A and input A