8 Zone Speaker Selector Switch Box, Multi-Channel, Volume Control

Product Highlights

This speaker selector box allows you to play audio to up to eight different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.

DETAILS

Features:

Multi-Channel High Powered Amplifier
Individual Speaker Volume Control
Support Two Stereo Amplifiers
Rugged & Durable Housing Construction, Cabinet Heatsink
Control Powered 6 Channel Amplifier
Plug and Play Easy Install
Up To 8 Separate Speakers Pair To Your Stereo System.
Accepts Speaker Wires Up To 14-Gauge.
Handles 100 Watts Per Channel With Speaker Systems That Have A Minimum
Protection Circuitry Keeps It Running Smoothly

What's in the Box:

Power Stereo Speaker Selector

Technical Specs:

Power Output:8 x 25 Watts
Minimum Impedance: 4 Ohms
Frequency Response: 20Hz - 20KHz
Speaker Terminal Wire Size: 14-22 gauge
Max. Amplifier Input: 100W RMS, 150W AVG
Max. Output per Speaker: 18W RMS, 50W AVG
Dimensions 12.8'' X 2.04'' X 6.12'' -inches

What's In The Box

Power Stereo Speaker Selector

Specification

This speaker selector box allows you to play audio to up to eight different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.

MANUALS & DOWNLOADS

PSS8 - Manuals

Questions & Answers

QUESTIONS & ANSWERS

Ask a Question

What does the PROTECTION button do? When should it be used/not used?

If you are using more than 2 sets of speakers you need to use the impedance protection button
What if I run a 120 w amp thru this ? Thanks

Yes it will still handle it but no more than that
Hi . can I use this to connect 8 amplifiers then switch between them to set of speakers as long as I don't urn on 2 amplifiers at the same time? Thanks

The PSS8 is a speaker distribution. only need one receiver amplifier
I had asked for a detailed connection drawing for a 7.2-channel AV receiver and was provided this response "Use the Front Left & Right to connect with the speaker selector From the speaker selector A chnnel will be your front. B, C, D, and so forth will be yor distribution Pyle USA" So I have to ask does the surround sound effects, subwoofer etc all go through the front left and right connection? Or do you loose the surround sound effects when essentially running all the speakers through the front left and right?

The speaker selector is a speaker distribution system only and not a suround system. You still have the suround effect on the AV receiver you are using
can you provide a detailed wiring diagram when used with a Denon AVR-S940H is a 7.2-channel AV receiver. It looks like there are only 2 input connections R and L So this would only control whatever is coming from the "front R and L" of the 7.2 Channel speaker?

Use the Front Left & Right to connect with the speaker selector

From the speaker selector A chnnel will be your front.
B, C, D, and so forth will be yor distribution

8 Zone Speaker Selector Switch Box, Multi-Channel, Volume Control